Time condition - question/improvement

Don't hesitate to post if you have an improvement idea
Post Reply
KamilR
Posts: 2
Joined: 20 Jun 2020, 23:26

Time condition - question/improvement

Post by KamilR »

Time Condition can execute on a given time. My question is how often is this checked?

I've run some tests with just this one line/condition in some cases it finishes 0,9 sec after a given time, and sometimes it goes down to like 300 ms.
It would be great to be able to set not only HH:mm:ss but also miliseconds so that I can be sure for it to start let say 00:00:00:000 and not something like 00:00:00:800
Execution duration shows 0,001 seconds in all cases - so my question is - where the rest of this time goes ? I

KamilR
Posts: 2
Joined: 20 Jun 2020, 23:26

Re: Time condition - question/improvement

Post by KamilR »

Another issue I have with 'Time condition' is that is usually takes 50-60ms to execute but sometimes in randomly goes up to 800-900ms
Attachments
test.jpg
test.jpg (123.68 KiB) Viewed 23 times

Post Reply